In bicycle components, shoulder cover usually refers to a part of the five way part, also known as the five way shoulder cover. It is usually installed at both ends of the five way joint, mainly to protect the central axis and seal, prevent dust, mud and other impurities from entering the interior of the five way joint, and affect the rotation and service life of the central axis. The following are the installation steps for the shoulder cover:
1. Preparation work: Ensure that the five links and the center axle have been correctly installed on the frame, and that the center axle rotates smoothly. At the same time, clean the installation surfaces at both ends of the five way connector, remove oil stains, dust, and debris to ensure that the shoulder cover can fit tightly.
2. Install shoulder cover: Align the shoulder cover with the installation position of the five way end and gently press it into place. Shoulder covers usually have a certain degree of elasticity and can be squeezed into the installation slot of the five way connector. Be sure to ensure that the shoulder cover is installed flat, without tilting or twisting.
3. Inspection and adjustment: After installation, check whether the shoulder cover is firmly installed, whether it is fully adhered to the surface of the five way joint, and whether there are gaps or looseness. If the shoulder cover is not installed properly, it may result in poor sealing effect and affect the performance of the bicycle.
Different types of bicycles and five way designs may result in slightly different installation methods for shoulder covers. If you encounter any problems during the installation process, it is recommended to refer to the bicycle manual or consult a professional bicycle repairman.
